Editing Schematicannon (section)

=== Cannon Firing ===
Once the settings and all preliminary conditions are met for the cannon, the player may begin the firing process. Note: the cannon does not have to face the correct direction of the selected area, as it will self-correct during the process. In the middle segment of the menu for the cannon, there are 3 buttons that control the status of the cannon. Play, Pause, and Stop respectively. By default, the cannon begins in a paused state, with a yellow indicator on top. To begin the firing of the cannon, click on the Play button. This will activate the firing of the cannon, with a green indicator on top. If the player wishes to stop/end the firing, they do so by pressing the Stop button, which will function as if the Schematic is finished building.

The cannon will build in an additive method, beginning from the bottom layer and working its way to the top.

The cannon does not have a native limit for its range. However, it will only build given that the selected area is loaded within its respective chunk. Therefore, it's recommended that the cannon and player stay near the area of selection, or have another player be loading the chunks if used in a server. The cannon additionally may only build within its designated dimension.

Once the cannon finishes firing, it will play a 'Ding' sound to let the player know that the building process is complete. The menu will return to its stopped state, with a red indicator on top of the button. The Schematic consumed will then return into an Empty Schematic, which may be used again in the future.[[File:Scanning and Printing Schematics in Create 1.14.3|thumb]]