Fluid Pipe

Fluid Pipes are blocks used to transport and deal with fluids.

Obtaining

Crafting

Name	Ingredients	Crafting Recipe
Fluid Pipe	Copper Sheet + Copper Ingot	4
Smart Fluid Pipe	Brass Sheet + Fluid Pipe + Electron Tube
Mechanical Pump	Cogwheel + Fluid Pipe
Fluid Valve	Iron Sheet + Fluid Pipe

Usage

Placement

Normal pipes laid parallel to each other will automatically connect. Fluid Pipes can be adjacent without connecting if they have been made transparent with a Wrench, are encased with Copper Casing, or have a Wooden or Metal Bracket. Unlike Brackets or windowed pipes, Copper Casing can be placed on the corners of Fluid Pipes, locking the pipe in place and preventing it from connecting to more adjacent pipes.

Fluid Pipe

Fluid Pipes can only move one liquid at a time; if different liquids intersect, the pipe will clog. Each time a fluid network splits, the fluid transfer rate is split between outputs. Fluid Pipes require Mechanical Pumps to move liquid.

Mechanical Pump

Mechanical Pumps have a maximum range of 16 blocks on either side, adjustable in the Config. Mechanical Pumps will move fluid in only one direction at a time. Brown arrow symbols on the pump indicate the direction of flow. The flow direction can be changed by using a Wrench. When a wrench is used, the entire valve will appear to have rotated 180 degrees. The brown directional arrows will appear on the other side of the pump's gear.

Fluid Valve

Fluid valves can be used to close or open the flow in a pipe. Fluid Valves can be switched between open and closed by providing Rotational Force to the side. This is often done with a Valve Handle or Gearshift. A set of directional arrows on the side of the valve will also rotate to indicate whether the valve is open or closed.

Smart Fluid Pipe

Smart Fluid Pipes can be used to allow only a certain liquid to pass through them. This can be set by placing a bucket or bottle of the liquid in the Filter slot on the pipe. A List Filter with Respect Data on may be required for the Smart Pipe to distinguish between certain liquids, such as Potions.

Fluid Transfer Rates

Fluid transfer rates are measured in milli-buckets per tick (mb/t). Mechanical pumps transfer fluid at the rate of 0.5mb/t * rpm. Thus Mechanical Pumps at a higher rotational speed will transfer fluids faster. When first starting up a pipe network, fluids take a few moments to propagate to each point before beginning to transfer fluid between containers which can be witnessed through windowed pipes. However, the pipes themselves do not store fluids. The rate that fluids move through the pipes is also affected by the pump rpm.

Pumps on the same network can combine their throughputs. When pipes split in two or more directions, fluid will be distributed equally between containers so long as the initial fluid propagation is also equal. Fluid transfer and propagation rate will also be divided by the amount of splits.

Open Ended Pipes

Pipes can pick up or place fluid source blocks. When outputting a fluid into air, the pipe will leak, spraying the fluid out in front of it. If possible, a fluid source block will be placed in the world after the pipe outputs 1000mB of fluid. Once there is a fluid block in front of the pipe, the flow will stop until the fluid block is cleared.

Certain leaked fluids have effects.

•  Water - Puts out fires and extinguishes entities on fire.
•  Lava - Deals fire damage and sets entities on fire.
•  Milk - Removes status effects.
•  Potion - Applies the potion's effect.

Advancements

Advancements

Name	Description	Requirements
Flow Spy	Watch fluid propagate through a windowed fluid pipe. Fluid pipes become windowed when a wrench is used on them.	Right click a Fluid Pipe with a Wrench to make it windowed, then watch fluid pass through it.
Never cross the Streams!	Watch two fluids meet in your pipe network.	Pipe two fluids into one Pipe.
There's a leak!	Watch an open pipe take or place fluids into the world.	Watch an open Fluid Pipe take or place fluids into the world.

Gallery

• 
  Adjacent pipes separated at the corners with Copper Casing
• 
  Separate adjacent fluid pipes
• 
  A copper encased pipe spouting Poison onto an iron block.

History

• 0.5.1:
  • Mechanical Pumps no longer reverse direction based on kinetic input.
  • Fixed pipe connections pulling fluids with half the speed compared to a directly attached pump
• 0.5: Fluid Pump and Fluid Valve recipes changed.
• 0.4:
  • Fluid Pipe recipe returns 4 fluid pipes instead of 8. Uses vanilla copper.
  • Fluid networks can extract Lava and Water from Cauldrons.
• 0.3: Introduced.