Shaft: Difference between revisions

The shaft is a basic mechanical component in Create. A shaft can be used to connect two mechanical components such that the rotation of one rotates the other, and shafts serve as the only blocks upon which Mechanical Belts can be placed. you can now stroke your shaft too.

Obtaining

Crafting

Name

Ingredients

Crafting Recipe

Shaft

Andesite Alloy

Sawing

Name

Ingredients

Crafting Recipe

Shaft

Andesite Alloy

Usage

Connecting components

When two mechanical components are connected by a shaft, any rotational force provided to either component will also be provided to the other component at the same speed. As such, if both components provide stress, this can cause the machine to become overstressed.

Mechanical belts

A Mechanical Belt must be placed between two shafts. The shafts must be horizontal, parallel to each other, and perpendicular to the belt itself, and they must be aligned horizontally, vertically, or diagonally. Please note that you cannot have any other diagonal angles other than 45°. Additionally, no obstruction can exist between the two endpoints with the exception of other shafts.

A Brass Casing can be placed over any segment of a mechanical belt, and this includes segments that contain shafts.

Many Recipes also use Shafts to craft Various Components, here's a list of items that use them as of V0.3

History

0.1: Added

Blocks

Machines

Contraption Blocks	Contraption Anchors Cart Assembler Clockwork Bearing Elevator Pulley Gantry Carriage Mechanical Bearing Mechanical Piston Rope Pulley Windmill Bearing Contraption Controls Linear Chassis Secondary Mechanical Harvester Mechanical Plough Mechanical Roller Radial Chassis Seat Sticker Train Controls Train Station Train Track Windmill Sail

Kinetic Blocks	Adjustable Chain Gearshift Clutch Cogwheel Large Encased Chain Drive Gearbox Vertical Gearshift Mechanical Belt Rotation Speed Controller Sequenced Gearshift Shaft

Item Transportation	Funnel Andesite Brass Tunnel Andesite Brass Chute Smart Creative Depot Item Vault Mechanical Arm Mechanical Belt Portable Storage Interface Smart Observer Threshold Switch Toolbox Weighted Ejector

Generators	Creative Motor Hand Crank Large Water Wheel Steam Engine Valve Handle Water Wheel Windmill Bearing

Redstone Components	Analog Lever Nixie Tube Powered Latch Toggle Pulse Extender Pulse Repeater Redstone Contact Redstone Link Rose Quartz Lamp Train Observer Train Signal

Kinetic Appliances	Crushing Wheel Cuckoo Clock Deployer Display Board Flywheel Encased Fan Mechanical Arm Mechanical Bearing Mechanical Crafter Mechanical Drill Mechanical Mixer Mechanical Press Mechanical Saw Millstone Turntable

Fluid Transportation	Fluid Pipe Mechanical Pump‎‎ Fluid Valve Smart Fluid Pipe Fluid Tank Creative Hose Pulley Item Drain Portable Fluid Interface Spout

Other	Blaze Burner Casing Andesite Copper Block of Industrial Iron Brass Train Shadow Radiant Clipboard Controller Rail Copper Backtank Crafting Blueprint Display Link Metal Scaffolding Andesite Copper Brass Netherite Backtank Nozzle Steam Whistle

Material

Metal Blocks	Block of Andesite Alloy Block of Brass Block of Experience Shingles Tiles Zinc Ore Block of Zinc

Decoration	Bell Peculiar Haunted Copycat Block Metal Bars Andesite Bars Copper Bars Brass Bars Metal Ladders Andesite Ladder Brass Ladder Copper Ladder Metal Girder Sliding Door Andesite Copper Brass Train Glass Train Trapdoor

Glass	Tiled Framed Horizontal Vertical Tiled Pane Framed Pane Horizontal Vertical Framed Glass Trapdoor

Windows	Oak Pane Spruce Pane Birch Pane Jungle Pane Acacia Pane Dark Oak Pane Mangrove Pane Crimson Pane Warped Pane Ornate Iron Pane

Palette Blocks	Andesite Asurine Calcite Crimsite Deepslate Diorite Dripstone File:Cut Granite Bricks.png Granite Limestone Rose Quartz Block Ochrum File:Cut Scorchia Bricks.png Scorchia Scoria Tuff Veridium

Removed Blocks

Removed Machines	Adjustable Crate Adjustable Repeater Adjustable Pulse Repeater Cocoa Jungle Log Copper Ore Copper Block Belt Observer Extractor Linked File:Funnel.png Funnel Furnace Engine File:Transposer.png Transposer Linked

Removed Palettes	Dark Scoria Chiseled Cobblestone Fancy Bricks Paved Dolomite Chiseled Cobblestone Fancy Bricks Paved Gabbro Chiseled Cobblestone Fancy Bricks Paved Limesand Weathered Limestone Chiseled Cobblestone Fancy Bricks Paved

uk:Вал fr:Rotor ru:Вал

@@ Line 3: / Line 3: @@
 {{Block|image=Shaft.png|renewable=Yes|stackable=Yes (64)|tool=Wooden Pickaxe|tool2=Wooden Axe|blast_resistance=6|hardness=1.5|solid=Yes|full=No|transparent=Yes|luminant=No|flammable=No|lavasusceptible=No}}
-The '''shraft''' is a basic mechanical component in Create. A shraft can be used to connect two mechanical components such that the rotation of one rotates the other, and shrafts serve as the only blocks upon which [[Mechanical Belt|Mechanical Belts]] can be placed. you can now stroke your shraft too.
+The '''shaft''' is a basic mechanical component in Create. A shaft can be used to connect two mechanical components such that the rotation of one rotates the other, and shafts serve as the only blocks upon which [[Mechanical Belt|Mechanical Belts]] can be placed. you can now stroke your shaft too.
 == Obtaining==
@@ Line 10: / Line 10: @@
 {{RecipeTableHead}}
 {{RecipeTable
-|Shraft
+|Shaft
 |[[Andesite Alloy]]
 |{{Crafting Table|B1=Andesite Alloy|B2=Andesite Alloy|Output=Shaft,8}}
@@ Line 19: / Line 19: @@
 {{RecipeTableHead}}
 {{RecipeTable
-|Shraft
+|Shaft
 |[[Andesite Alloy]]
 |{{Mechanical Saw|Input=Andesite Alloy|Output=Shaft,6}}}}
@@ Line 27: / Line 27: @@
 ===Connecting components===
-When two mechanical components are connected by a shraft, any [[Rotational Force|rotational force]] provided to either component will also be provided to the other component at the same speed. As such, if both components provide [[stress]], this can cause the machine to become overstressed.
+When two mechanical components are connected by a shaft, any [[Rotational Force|rotational force]] provided to either component will also be provided to the other component at the same speed. As such, if both components provide [[stress]], this can cause the machine to become overstressed.
 === Mechanical belts===
-A [[Mechanical Belt]] must be placed between two shrafts. The shrafts must be horizontal, parallel to each other, and perpendicular to the belt itself, and they must be aligned horizontally, vertically, or diagonally. '''Please note that you cannot have any other diagonal angles other than 45°.''' Additionally, no obstruction can exist between the two endpoints with the exception of other shrafts.
+A [[Mechanical Belt]] must be placed between two shafts. The shafts must be horizontal, parallel to each other, and perpendicular to the belt itself, and they must be aligned horizontally, vertically, or diagonally. '''Please note that you cannot have any other diagonal angles other than 45°.''' Additionally, no obstruction can exist between the two endpoints with the exception of other shafts.
-A [[Brass Casing]] can be placed over any segment of a mechanical belt, and this includes segments that contain shrafts.
+A [[Brass Casing]] can be placed over any segment of a mechanical belt, and this includes segments that contain shafts.
-Many Recipes also use shrafts to craft Various Components, here's a list of items that use them as of V0.3
+Many Recipes also use Shafts to craft Various Components, here's a list of items that use them as of V0.3
 *[[Clockwork Bearing]]

Revision as of 20:32, 25 June 2024

Contents

Obtaining

Crafting

Sawing

Usage

Connecting components

Mechanical belts

History

Navigation menu

Shaft: Difference between revisions

Revision as of 20:32, 25 June 2024

Obtaining

Crafting

Sawing

Usage

Connecting components

Mechanical belts

History

Navigation menu

Search