Schematicannon

The Schematicannon is used to build structures.

Obtaining

Crafting

Name	Ingredients	Crafting Recipe
Schematicannon	Cauldron + Any Log + Dispenser + Smooth Stone + Iron Block
Schematic Table	Any Wooden Slab + Smooth Stone
Empty Schematic	Paper + Light Blue Dye
Schematic and Quill	Schematic + Feather

Usage

Schematics

Right click two blocks to select the area to be copied to the schematic. Right click again to name, save, and/or upload the schematic. Shift right click to remove the selection. Hold ctrl to highlight a block in midair and Scroll to adjust the distance. Once two blocks are selected, look at the selection's faces and ctrl-scroll to adjust the size.

Once a Schematic And Quill is saved, it must be put through a Schematic Table to be used in a Schematicannon.

If a Schematic is uploaded, it can be copied onto an Empty Schematic with a Schematic Table. This can be done across worlds.

Cannon Prepping

A Schematic must first be positioned before being placed in the cannon. Position the Schematic by right clicking. While holding the schematic, the selection and a control menu can be viewed.

The cannon will take the blocks required to build the structure from adjacent inventories.

The cannon runs on Gunpowder.

Cannon Settings

The Cannon can be set to Not Replace Solid Blocks, Replace Solids with Solids, Replace Solid with Any, Replace Solid with Empty, Skip Missing Blocks, and Protect Tile Entities.

A Book can be placed in the cannon to make a list of the required blocks.

File:Scanning and Printing Schematics in Create 1.14.3