Blaze Burner

A Blaze Burner is a heating component that is required for certain Mixing recipes.

Obtaining

Crafting an Empty Blaze Burner

Name	Ingredients	Crafting Recipe
Empty Blaze Burner	Iron Sheet + Netherrack

Filling an Empty Blaze Burner

Blaze Burners must have Blazes in them to function. To put a Blaze in an Empty Blaze Burner, right-click on a Blaze to capture it. Alternatively, an Empty Blaze Burner can be filled by clicking on a Blaze Spawner. This method can be repeated without risk of destroying the Blaze Spawner.

Usage

Heating

Blaze Burners are used for Heating and Super-Heating Basins when doing Mixing recipes. They can also be used as a heat source for boilers used to power Steam Engines. When a heat-able block is placed above a fueled Blaze Burner, the Burner will appear to channel heat into the block.

Blaze Burners are an important milestone, as they are required to make Brass. Brass is used for many important machines, including filtered item transportation.

Right-clicking a Blaze Burner with any item that can be used as Furnace fuel will temporarily put it in a Heated state. Right-clicking a Blaze Burner with a Blaze Cake will temporarily put it in a Super-Heated state.

A deployer or Mechanical Arm can be used to automatically fuel it, given any burnable item as an input. It will stop if adding fuel will cause it to exceed it's maximum fuel capacity of 500 seconds, so no fuel is wasted.

Fuel burn time is the same as a vanilla Furnace. The Blaze inside changes its size and texture depending on the amount of fuel provided, following the phases:

• Phase 1 — Smouldering — Does not provide any heat, but provides "passive" heat level for boilers (for more details see Heat sources). This is the default state when placing the Burner, or when the fuel runs out.
• Phase 2 — Heated/Kindled — Allows to perform recipes that require heating. Lasts for the fuel's burn time and provides 1 heating level to Steam Engine per Blaze Burner
• Phase 3 — Super-Heated/Seething — Allows to perform every Mixing recipe and provides 2 heating levels to Steam Engine per Blaze Burner. Only achievable using the Blaze Cake. Always lasts for 160 seconds. The Blaze Burner cannot be re-fed during this phase.

Train Controlling

When assembled with a Train and given a Train Schedule, it will drive the Train to the Train Stations the schedule specifies.

Decoration

Blaze Burners can be given a set of Engineer's Goggles by using a pair on them.

Empty Blaze Burners can be lit on fire with a Flint and Steel as a decorative block. While lit, they can be given Soul Sand or Soul Soil to turn the fire into Soul Fire. These do not serve as heat for mixer recipes. However, they can be used as a passive heat source for Steam Engine boilers and for Bulk Smoking and Bulk Haunting using the lit and soul fire versions respectively.

Gallery

• 
  Empty Blaze Burner
• 
  smouldering phase
• 
  heated phase
• 
  super-heated phase
• 
  Lit Empty Blaze Burner
• 
  Soul Fire Empty Blaze Burner

History

• 0.5:
  • Assets reworked.
  • Can now be given Engineer's Goggles.
  • No longer has a Fading phase.
  • Superheated burn time of blaze cakes changed from 50 seconds to 160 seconds
• 0.3.2: Decorative Blaze Burners can now accept soul sand to make it a soul fire.
• 0.3: Added.