Schematicannon

The Schematicannon is used to build structures.

Obtaining

Crafting

Name	Ingredients	Crafting Recipe
Schematicannon	Cauldron + Any Logs + Dispenser + Smooth Stone + Iron Block	File:Schematicannon (Recipe).png
Schematic Table	Any Wooden Slab + Smooth Stone	File:Schematic Table (Recipe).png

Usage

Schematics

Craft Paper with a Light Blue Dye to make an Empty Schematic. Craft the Empty Schematic with a Feather to make a Schematic And Quill.

Saving a Schematic

Right click two blocks to select the area to be copied to the schematic. Right click again to name, save, and/or upload the schematic. Shift right click to remove the selection. Hold ctrl to highlight a block in midair and Scroll to adjust the distance. Once two blocks are selected, look at the selection's faces and ctrl-scroll to adjust the size.

If a Schematic is uploaded, it can be copied onto an Empty Schematic with a Schematic Table. This can be done across worlds.

Cannon Prepping

A Schematic must first be positioned before being placed in the cannon. Position the Schematic by right clicking. While holding the schematic, the selection and a control menu can be viewed.

The cannon runs on Gunpowder.

Cannon Settings

The Cannon can be set to Not Replace Solid Blocks, Replace Solids with Solids, Replace Solid with Any, Replace Solid with Empty, Skip Missing Blocks, and Protect Tile Entities.

A Book And Quill can be placed in the cannon to make a list of the required blocks.