Windmill

Simple Windmill from a creative test

Error creating thumbnail: Unable to save thumbnail to destination

Windmill with more than one chassis on the rotation axis of the mill.

It is composed of a Windmill Bearing - or Mechanical Bearing in older versions - and Wool/Sails.

Usage

Any block can be attached to the front of the Windmill Bearing but only Wool and Sails will produce power. The wool or sail can be placed in any configuration and shape does not matter. Super Glue is needed to attach blocks together. Sails will connect to each other and blocks that have already been attached without needing to use Super Glue. Right-click the windmill bearing with an empty hand to start the windmill. If you want to stop it to change the attached blocks, simply right-click on the block with an empty hand again. A Wrench can be used to change the spin direction of the windmill.

Amount of power from windmill

Number of attached wool/sail blocks	Power produced	RPM
0-7	0su	0
8-15	512su	1
16-23	1024su	2
24-31	1536su	3
32-39	2048su	4
40-47	2560su	5
48-55	3072su	6
56-63	3584su	7
64-71	4096su	8
72-79	4608su	9
80-87	5120su	10
88-95	5632su	11
96-103	6144su	12
104-111	6656su	13
112-119	7168su	14
120-127	7680su	15
128+	8192su	16

History

• Version 0.3.1: The minimum sail blocks required can now be adjusted in the Config.
• Version 0.3: Split functionality from Mechanical Bearing into the new Windmill Bearing.
• Version 0.1: Added.