Stressometer
The Stressometer is used to measure the amount of Stress on a Shaft. This stress is the "load" of the system.
Obtaining[edit | edit source]
Breaking[edit | edit source]
Hardness | 2 | |
---|---|---|
Tool | ![]() | ![]() |
Breaking time[Note 1] | ||
![]() | 3 | 3 |
![]() | 1.5 | 1.5 |
![]() | 0.75 | 0.75 |
![]() | 0.5 | 0.5 |
![]() | 0.4 | 0.4 |
![]() | 0.35 | 0.35 |
![]() | 0.25 | 0.25 |
- ↑ Times are for unenchanted tools as wielded by players with no status effects, measured in seconds. For more information, see Breaking § Speed.
Crafting[edit | edit source]
Name | Ingredients | Crafting Recipe |
---|---|---|
Speedometer | Compass + Andesite Casing |
|
Stressometer | Speedometer |
Usage[edit | edit source]
When connected to a component, the amount of stress in the system versus the stress capacity is shown by a hand on the face of the Stressometer. The higher the hand is, the more stress there is in the system. It can also output a Redstone Comparator signal, outputting at a strength of 15 when the system is overstressed. You can get more precise information such as current and max stress by using Engineer's Goggles.
Display Link[edit | edit source]
Progress Bar: Solid Squares indicate usage, checkered squares indicate remaining capacity
Percentage: The percentage of full capacity that is in use
Stress in SU: How much SU have been used by attached kinetic mechanisms
Total Capacity: The maximum SU that the attached system can supply
Remaining SU: How much SU is left.
Blocks | |||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
|